How to Fix Epson Printer Error Code 0xE8 – Step-by-Step
Epson Printer Error Code 0xE8 (Call USA/CA: +1–804–460–7160) is a serious internal hardware error that usually indicates a malfunction in the printer’s mainboard or internal circuitry. This error often appears during startup and can cause the printer to stop functioning completely. When Error Code 0xE8 occurs, the printer may display an error message, flash warning lights, or become unresponsive, preventing any printing tasks.
| — Click Here to Start a live chat with our support team — |
(Call USA/CA: +1–804–460–7160)
Common Causes of Error Code 0xE8
Error Code 0xE8 is commonly triggered by internal hardware failure, power supply fluctuations, electrical surges, or overheating. Dust buildup, moisture exposure, or prolonged heavy usage can also contribute to this issue. In some cases, outdated firmware or corrupted system data may cause communication failures that result in this error.
Initial Safety Steps Before Troubleshooting
Before attempting any troubleshooting, turn off the printer using the power button and unplug it from the power outlet. Disconnect all connected cables, including USB or Ethernet cables. Allow the printer to remain unplugged for a few minutes. This ensures safety while handling internal components and helps clear minor electrical glitches.
Step 1 Perform a Complete Power Reset
A complete power reset is often the first and most effective step. With the printer turned off and unplugged, press and hold the power button for thirty to forty seconds to discharge residual electricity. Release the button and leave the printer unplugged for at least ten minutes. After waiting, plug the printer back in and turn it on. This process allows internal components to reset and may clear Error Code 0xE8.
Step 2 Check for Overheating or Environmental Issues
Overheating can cause internal components to malfunction. Ensure the printer is placed in a well-ventilated area away from direct sunlight or heat sources. If the printer feels warm, allow it to cool down completely before restarting. Avoid placing the printer in enclosed spaces where airflow is restricted.
Step 3 Inspect Internal Areas for Dust or Damage
Open accessible covers and carefully inspect visible internal areas for dust buildup, ink leakage, or signs of damage. Use a soft, dry, lint-free cloth to gently clean dust from accessible components. Do not use liquids or compressed air, as these can damage sensitive electronics or push debris deeper inside.
Step 4 Update Printer Firmware
Outdated firmware can cause internal communication issues and trigger Error Code 0xE8. If your Epson printer allows access to settings or connects to a computer before showing the error, updating the firmware may help. Follow the recommended update instructions carefully and ensure the printer remains powered on throughout the update process.
Step 5 Reinstall or Update Printer Drivers
Corrupted or outdated printer drivers can sometimes cause system-level errors. Uninstall the existing Epson printer driver from your computer, restart the system, and install the latest compatible driver for your printer model. Once installed, reconnect the printer and test its functionality.
Step 6 Use a Stable Power Source
Power fluctuations and surges are common causes of internal hardware errors. Connect the printer directly to a wall outlet instead of using extension cords or power strips. Using a stable power source helps prevent further electrical damage and reduces the risk of recurring errors.
Step 7 Allow the Printer to Rest
Continuous heavy usage can strain internal components. Turn off the printer and allow it to rest for several hours if it has been used extensively. This helps reduce internal stress and allows components to cool and stabilize.
Step 8 Identify Possible Hardware Failure
If Error Code 0xE8 persists after all troubleshooting steps, the issue is likely due to a faulty mainboard or internal circuit failure. These components cannot usually be repaired through basic troubleshooting. Professional repair or replacement of internal parts may be required.
Preventing Epson Printer Error Code 0xE8
To reduce the risk of Error Code 0xE8 in the future, keep the printer clean, ensure proper ventilation, avoid power surges, and use the printer within recommended usage limits. Regular maintenance and careful handling help extend the life of your Epson printer.
When Professional Service Is Needed
If none of the steps resolve Error Code 0xE8, professional servicing is recommended. In many cases, replacing the printer may be more cost-effective than repairing major internal hardware components. Early diagnosis helps prevent further damage and ensures reliable printing performance.
