5 Secret Tips For Keeping Your Swimming Pool Clean, Beautiful, and Inviting At All Times
Maintaining cleanliness and Swimming pool care Proper and consistent cleaning not only helps keep the water clean but also helps prevent problems that may occur with the swimming pool system and helps extend the life of your swimming pool for a long time. This can be done in the following simple ways:
1. Leaves, trash, insect debris, and dirt should be removed from the pond
Swimming pool care By scooping up dirt every 2-3 days using a swing or sieve to scoop up dirt, leaves, insects, and other foreign objects from the water. Because if left for a long time, this dirt will sink under the water, making the water cloudy or dirty, making it even more difficult to clean.
2. The tiles and edges of the swimming pool should be scrubbed weekly
If the pool tiles and edges are not maintained regularly, black mold and algae will grow all over the place. In addition to making the pool dirty, it can also become slippery and dangerous for pool users.
Therefore, it should be Cleaning the swimming pool Regularly every week, using a vacuum cleaner for cleaning the swimming pool. You should choose one that is appropriate for the condition of your own swimming pool. Pool walls, if they are concrete or tile, can be cleaned with a hard brush. But if they are vinyl or fiberglass tiles, it is recommended to use a soft sponge to clean them. Swimming pool brushes should be brushes that can be used to scrub dirt off the floor and walls of swimming pool tiles. There are 2 types.
Pro Tip: Keep your pool sparkling clean with our professional Swimming Pool Water Treatment Glendale AZ. We ensure safe, clear, and healthy water all year round — book your service today!
1. Plastic swimming pool brush
It is a soft-bristled brush that is lightweight and has a shorter lifespan than a stainless steel brush. It is ideal for tiled or fiberglass pools.
2. Stainless steel swimming pool brush
This brush has very hard bristles, is heavier and more expensive than a plastic brush. It is strong and durable, and can be used for a long time. It is suitable for cement pools or tile pools, but be careful about scratches.
3. Vacuum the sediment in the swimming pool
After using the pool brush, connect the hose and the suction head together by dropping the suction head into the water and filling the hose with water until it is full. Then connect it to the pool vacuum cleaner and vacuum the entire pool floor and walls. Choose a suction head that is appropriate for the type of material used to construct the pool. For example, if the pool is tiled, a soft brush should be used instead of a harder brush to prevent scratching the surface.
The suction hose and suction head are swimming pool maintenance equipment. They are used to connect to the pool vacuum cleaner. The suction head is available in both wheeled types for easier use and brush types to prevent damage to the tile surface. The suction hose is also available in lengths to suit the size of the pool.
4. Clean the filter
After scooping out leaves, trash, insect debris and other foreign objects, the filter should be removed and cleaned to prevent clogged filters, as the filter is a part that helps. Swimming pool care Free from dirt
5. Check the pH value and other chemical content in the swimming pool
Normally, the pH of pool water should be controlled at pH 7.2-7.8 (pH>7 is alkaline and pH<7 is acidic). If the pH value is too acidic, it will affect the corrosion of grout and cement glue.
Using a pH test kit is easy: just scoop up pool water and put it in a test tube, then add about 4 drops of the solution that comes with the test kit. Shake to mix. Then you can see the results on the scale on the cylinder. In addition to pH, there are other chemicals that must be added to the pool water. You can measure the chemical values in the water using a digital meter. The amounts of other chemicals should be as follows:
- The sulfate content in swimming pools should not exceed 250 ppm. If it is too high, it will corrode the grout and cement glue.
- The calcium content should be between 200-250 ppm. If it is lower than this, the water will draw calcium from the grout, causing corrosion. If it is too high, it will cause white stains on the tiles and can also have a negative effect on the water pump.
Pro Tip: Looking for the Best Water Purification System Glendale AZ? Get pure, safe, and great-tasting water for your home with our advanced purification solutions. Contact us today!
